An underwater, multispectral light source: Difference between revisions

From Psych 221 Image Systems Engineering
Jump to navigation Jump to search
imported>Projects221
imported>Projects221
Line 28: Line 28:


== Methods ==
== Methods ==
'''LED Design'''
{|
|LED Color|| Red-Orange|| PC Amber|| Lime|| Green|| Cyan|| Blue
|-
|Lumens @ 350mA ||72 lm ||78 lm ||167 lm|| 102 lm ||76 lm ||41 lm
|-
|Lumens @ 700mA ||134 lm ||140 lm ||313 lm ||161 lm ||122 lm|| 70 lm
|-
|Efficacy @ 350mA|| 98 Lm/W ||73 Lm/W ||174 lm/W ||100 Lm/W ||75 Lm/W ||38 Lm/W
|-
|Efficacy @ 700mA|| 83 Lm/W || 63 Lm/W || 160 lm/W || 68 Lm/W ||51 Lm/W ||29 Lm/W
|-
|Typical Wavelength|| 617 nm ||591 nm ||567 nm ||530 nm ||505 nm|| 470 nm
|-
|Wavelength Range|| 610 to 620 nm|| 588 to 592 nm|| 566 to 569 nm ||520 to 540 nm ||490 to 515 nm ||460 to 485 nm
|-
|Beam Angle ||125°|| 120°|| 125°|| 125°|| 125°|| 125°
|-
|Recommended Operating Current|| 700 mA|| 350 mA|| 700 mA|| 700 mA|| 700 mA|| 700 mA
|-
|Maximum Rated Drive Current|| 700 mA|| 700 mA|| 1000 mA|| 1000 mA|| 1000 mA|| 1000 mA
|-
|Typical Forward Voltage|| 2.1 Vf|| 3.05 Vf ||2.75 Vf|| 2.9 Vf|| 2.9 Vf|| 2.95 Vf
|-
|Maximum Forward Voltage ||2.8 Vf ||3.51 Vf|| 3 Vf ||3.51 Vf ||3.51 Vf ||3.51 Vf
|-
|Thermal Resistance ||8 C°/W ||10.4 C°/W|| 6.4 C°/W ||10.4 C°/W ||10.4 C°/W ||10.4 C°/W
|-
|Max Recommended Junction Temp ||135 °C|| 130 °C ||150 °C|| 150 °C ||150 °C|| 150 °C
|-
|Operating Temperature Range ||-40 to 120 °C ||-40 to 110 °C ||-40 to 135 °C ||-40 to 135 °C ||-40 to 135 °C ||-40 to 135 °C
|-
|Dimensions L x W x H|| 4.5 x 3 x 2 mm|| 10 x 10 x 3.7 mm ||10 x 10 x 3.7 mm ||10 x 10 x 3.7 mm ||10 x 10 x 3.7 mm ||10 x 10 x 3.7 mm
|}


== Results ==
== Results ==

Revision as of 22:24, 16 March 2015

Group members: Bhrugurajsinh Pradyumansinh Chudasama, Candice Murray, Anirban Chatterjee


Introduction

Background

Circuit Design


Optical Design


Underwater light sources


Absorption of light in water

Water exhibits much higher absorption of photons than air at some wavelengths of light. This can be seen in the graph below. Increasing the depth of the water increases the absorption, which can be modeled by the absorption equation I(x)=I(xo)*exp(α(xxo)) where α is the absorption coefficient for water at the wavelength of interest and I(x) and I(xo) are the intensities at the final and starting locations, respectively.


Scattering in water'

Methods

LED Design

LED Color Red-Orange PC Amber Lime Green Cyan Blue
Lumens @ 350mA 72 lm 78 lm 167 lm 102 lm 76 lm 41 lm
Lumens @ 700mA 134 lm 140 lm 313 lm 161 lm 122 lm 70 lm
Efficacy @ 350mA 98 Lm/W 73 Lm/W 174 lm/W 100 Lm/W 75 Lm/W 38 Lm/W
Efficacy @ 700mA 83 Lm/W 63 Lm/W 160 lm/W 68 Lm/W 51 Lm/W 29 Lm/W
Typical Wavelength 617 nm 591 nm 567 nm 530 nm 505 nm 470 nm
Wavelength Range 610 to 620 nm 588 to 592 nm 566 to 569 nm 520 to 540 nm 490 to 515 nm 460 to 485 nm
Beam Angle 125° 120° 125° 125° 125° 125°
Recommended Operating Current 700 mA 350 mA 700 mA 700 mA 700 mA 700 mA
Maximum Rated Drive Current 700 mA 700 mA 1000 mA 1000 mA 1000 mA 1000 mA
Typical Forward Voltage 2.1 Vf 3.05 Vf 2.75 Vf 2.9 Vf 2.9 Vf 2.95 Vf
Maximum Forward Voltage 2.8 Vf 3.51 Vf 3 Vf 3.51 Vf 3.51 Vf 3.51 Vf
Thermal Resistance 8 C°/W 10.4 C°/W 6.4 C°/W 10.4 C°/W 10.4 C°/W 10.4 C°/W
Max Recommended Junction Temp 135 °C 130 °C 150 °C 150 °C 150 °C 150 °C
Operating Temperature Range -40 to 120 °C -40 to 110 °C -40 to 135 °C -40 to 135 °C -40 to 135 °C -40 to 135 °C
Dimensions L x W x H 4.5 x 3 x 2 mm 10 x 10 x 3.7 mm 10 x 10 x 3.7 mm 10 x 10 x 3.7 mm 10 x 10 x 3.7 mm 10 x 10 x 3.7 mm

Results

Conclusions

References

1. H. Buiteveld and J. M. H. Hakvoort and M. Donze, "The optical properties of pure water," in SPIE Proceedings on Ocean Optics XII, edited by J. S. Jaffe, 2258, 174--183, (1994). [1]

2. K. S. Shifrin, Physical Optics of Ocean Water, American Institute of Physics, New York, (1988). [2]

3. "Optical Absorption of Water Compendium", [3]