2009 Jim Cummings
Back to Psych 204 Projects 2009
A Comparison of Segmentation Performance: Amateur, Experienced, and Algorithm
Segmentation of the brain scan images produced by functional magnetic resonance imaging is a fundamental first step for the production of functional activity maps. This process typically entails employing software that allows a user to differentially depict white matter, grey matter, cerebrospinal fluid from both one another and from other structures not of interest. In turn, the ability to accurately map functional data is dependent upon proper initial segmentation of images. Therefore, the motivation for this project was two-fold: 1) to allow an amateur with no hands-on knowledge to gain experience with a fundamental process of functional imaging and 2) to compare how alternate segmentation performances may differentially affect both the resultant three-dimensional meshes and the ability to accurately map functional data. This project specifically compared the results of segmentations produced by the amateur, a more experienced individual (as segmentation skill is thought to increase with practice), and an autosegmenting program.
Methods
Image Acquisition
All segmentations conducted were based on a single brain scan stored on file in the VISTA Lab. This file was provided by Jonathan Winawer
Segmentation
The amateur segmentation of the greyscale brain image was conducted using ITK-Snap and following directions supplied within VISTA Lab manual. The experienced segmentation of the same greyscale image had been previously completed by a member of the VISTA Lab and was provided by Jonathan Winawer. Finally, the algorithmic segmentation was conducted using the FSL automated preprocessing tool as implemented through VISTASOFT and following the directions supplied within the VISTA Lab manual.
Additionally, the segmentations were then transformed into three-dimensional meshes using ITK-Snap's built-in mesh constructor, allowing for initial comparison between performances.
Mapping of Functional Data
The three segmentations were also then transformed into three separate three-dimensional meshes using mrVista. Functional data maps were then projected onto these meshes in order to compare how structural differences may result in distinctive mappings. The functional data was of vision-related activity during a word rotation task. The data was from the same brain as the greyscale image employed for segmentation. The data file was provided by Jonathan Winawer.
Results
All results were limited to a basic visual comparison between alternate meshes and activity patterns. No statistical analysis of the significance of noted differences between meshes or activity patterns have been conducted.
Segmentation and ITK-Snap Meshes


Initial comparison of the amateur and experienced segmentation performances revealed a large difference in the number of handles produced during segmentation. Handles are essentially cavities within areas that have been segmented as white matter. Fixing them depends on their nature of origin: handles produced merely by failing to segment a patch within a region should be filled in; handles that result from falsely segmenting too far outwards (towards gray matter) should be resolved by removing the extraneous segmentation that produced the cavity. The large number of handles produced by the amateur segmentation would suggest a less cautious or diligent effort during the fine segmentation stage. This finding would indicate that a mere visual comparison of the the resulting ITK meshes for the amateur and experienced segmentations was deceiving; indeed, these meshes were largely similar, though the some handles (of the second type mentioned above) were apparent.
The algorithm segmentation, too, produced a sizable number of handles. However, of real comparative interest is the visual distinction between the meshes produced by algorithm and the experienced segmenter. Indeed, a three-dimensional mesh of solely the regions segmented by the experienced segmenter but not the algorithm (Algorithm "Misses" as seen in Figure 3 below) reveals some differences quite obvious to the naked eye. Of particular interest is the finding that the algorithm failed to segmented a sizable (again, statistical analysis absent from this report) amount of the ventral right hemisphere (indicated in blue). Similarly, a mesh of the material segmented by the algorithm but not the experienced segmenter (Algoritm "False Alarms" as seen in Figure 4 below) indicates some interesting differences. In addition to the algorithm segmenting the cerebellum (which is not of interest and thus not segmented by an experienced human segmenter), in some regions it would appear to also segment white matter much closer to the brain surface than does the human. This is the case for the anterior brain. Whereas a human segmenter has the contextual knowledge to not segment white matter to this proximity to the brain surface and CSF (as he would factor in a layer of gray matter), the algoritm would appear to fail in this regard.


mrVista Meshes & Mapping of Functional Data
dfsdfsdfsdfsdf

Below is an example of a retinotopic map. Or, to be precise, below will be an example of a retinotopic map once the image is uploaded. To add an image, simply put text like this inside double brackets 'MyFile.jpg | My figure caption'. When you save this text and click on the link, the wiki will ask you for the figure.
Once you upload the images, they look like this. Note that you can control many features of the images, like whether to show a thumbnail, and the display resolution.

Results - What you found
Retinotopic models in native space
Some text. Some analysis. Some figures.
Retinotopic models in individual subjects transformed into MNI space
Some text. Some analysis. Some figures.
Retinotopic models in group-averaged data on the MNI template brain
Some text. Some analysis. Some figures. Maybe some equations.
Conclusions
Here is where you say what your results mean.
References - Resources and related work
References
Software
Appendix I - Code and Data
Code
Data
Appendix II - Work partition (if a group project)
Brian and Bob gave the lectures. Jon mucked around on the wiki.
